M5*10mm Safety Wire Bolt

冷镦加工是一种少切削或无切削的压力加工新工艺
金屬。它是一種利用金屬在下列因素作用下產生塑性變形的加工方法
外力作用下，在模具的幫助下，重新分配和轉移金屬的體積，以形成
所需的零件或坯料。冷镦工艺最适合生产标准的
螺栓、螺絲、螺帽、鉚釘和銷等緊固件

Overall Description: M5×10mm 安全線螺栓

的 M5*10mm safety wire bolt is a specialized fastener designed to remain secure in high-vibration or high-movement environments by using safety wire (lock wire) to prevent loosening. It is commonly used in aerospace, automotive (motorsports), industrial machinery, and military applications where reliability is critical.

主要功能：

1. Thread Specifications:

   • Metric thread (M5): 5mm nominal diameter with a standard pitch of 0.8mm (coarse thread).

   • Length: 10mm (measured from under the head to the end of the shank).

2. Head Design:

   • Typically a hex head (6mm or 8mm across flats) for standard wrench tightening.

   • Some variants have a clevis head (rounded with a hole) for easier wiring.

   • A pre-drilled hole (1-1.5mm diameter) in the head or shank allows safety wire to pass through.

3. Material & Finish:

   • Stainless steel (A2/AISI 304 or A4/316) 耐腐蝕性。

   • Alloy steel (Grade 8.8, 10.9, or 12.9) with zinc plating or black oxide for high-strength applications.

   • 可能符合 military (MIL-SPEC) or aerospace (NAS, MS) standards.

4. Safety Wire Function:

   • The wire tension prevents rotation and loosening due to vibration.

安裝注意事項：

• Wire should pull the bolt in the tightening direction if it begins to loosen.

• Paired with other safety-wired bolts for optimal security.